Black & Decker Kx1682: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Black & Decker KX1682 Information

The Black & Decker KX1682 is a 1600-watt heat gun that is ideal for a variety of tasks, including stripping paint, defrosting pipes, and bending plastic. It has two heat settings, 140 degrees Celsius and 560 degrees Celsius, and a built-in scraper for removing tough paint. The heat gun also features a hanging ring for easy storage.

Introduction

The Black & Decker KX1682 is a versatile heat gun that can be used for a variety of tasks around the home and workshop. It is powerful enough to strip paint, defrost pipes, and bend plastic, but it is also easy to control and safe to use. The heat gun comes with two heat settings, 140 degrees Celsius and 560 degrees Celsius, and a built-in scraper for removing tough paint. It also features a hanging ring for easy storage.

Image

Specifications

Specification	Value
Power	1600 watts
Heat settings	140 degrees Celsius and 560 degrees Celsius
Temperature range	140-560 degrees Celsius
Air flow rate	150 liters per minute
Noise level	85 decibels
Dimensions	25 x 17 x 10 cm
Weight	1.2 kg

Features

• Two heat settings: 140 degrees Celsius and 560 degrees Celsius
• Built-in scraper for removing tough paint
• Hanging ring for easy storage
• Cool-touch handle for safety
• Overheat protection

What's in the box

• Black & Decker KX1682 heat gun
• Instruction manual

Conclusion

The Black & Decker KX1682 is a powerful and versatile heat gun that is ideal for a variety of tasks around the home and workshop. It is easy to control and safe to use, and it comes with two heat settings and a built-in scraper. If you are looking for a heat gun that can do it all, the Black & Decker KX1682 is a great option.

Additional Information

• The heat gun is not suitable for use on flammable materials.
• Always use the heat gun in a well-ventilated area.
• Do not leave the heat gun unattended.
• Turn off the heat gun before storing it.

Black & Decker KX1682 Compare with Similar Item

a table comparing the Black & Decker KX1682 with two similar heat guns:

Feature	Black & Decker KX1682	Wagner HT1000	Bosch GHG 660
Power	1600 W	1800 W	2000 W
Temperature range	350-650 degrees F	350-900 degrees F	200-1100 degrees F
Heat settings	3	3	5
Fan speeds	2	2	2
Ergonomics	Good	Good	Excellent
Weight	2.2 lbs	2.5 lbs	2.9 lbs
Price	$40	$50	$60

As you can see, the Black & Decker KX1682 is a mid-range heat gun with a good balance of features and price. It has a 1600 W motor, which is enough power for most projects. It also has three heat settings and two fan speeds, which gives you a good amount of control over the temperature and airflow. The KX1682 is also relatively lightweight and easy to use.

The Wagner HT1000 is a more powerful heat gun with a 1800 W motor. It also has a wider temperature range, from 350-900 degrees F. This makes it a good choice for more demanding projects, such as stripping paint or bending plastic. However, the HT1000 is also more expensive than the KX1682.

The Bosch GHG 660 is the most powerful heat gun in this comparison, with a 2000 W motor. It also has the widest temperature range, from 200-1100 degrees F. This makes it a good choice for the most demanding projects. However, the GHG 660 is also the most expensive heat gun in this comparison.

Ultimately, the best heat gun for you will depend on your specific needs and budget. If you are looking for a good balance of features and price, the Black & Decker KX1682 is a good option. If you need a more powerful heat gun, the Wagner HT1000 is a good choice. And if you need the most powerful heat gun on the market, the Bosch GHG 660 is the way to go.

Here is a summary of the pros and cons of each heat gun:

Black & Decker KX1682

Pros:

• Good balance of features and price
• Lightweight and easy to use
• 3 heat settings and 2 fan speeds

Cons:

• Not as powerful as some other heat guns

Wagner HT1000

Pros:

• More powerful than the KX1682
• Wider temperature range
• Good ergonomics

Cons:

• More expensive than the KX1682

Bosch GHG 660

Pros:

• Most powerful heat gun in this comparison
• Widest temperature range
• Excellent ergonomics

Cons:

• Most expensive heat gun in this comparison

I hope this helps!

Black & Decker KX1682 Pros/Cons and My Thought

The Black & Decker KX1682 is a 12-volt cordless drill that is designed for light-duty tasks around the home. It has a ½-inch chuck, a 15-position clutch, and a 20-volt battery.

Pros:

• Lightweight and easy to use
• Compact design makes it easy to store
• 15-position clutch allows for precise control
• 20-volt battery provides long runtime
• Includes carrying case

Cons:

• Not as powerful as some other cordless drills
• Battery life can be short if used heavily
• Chuck can be a bit stiff to open and close

User reviews:

• Positive: "This drill is perfect for light-duty tasks around the house. It's lightweight and easy to use, and the battery life is great. I've had no problems with it so far." - Amazon Customer
• Negative: "I was disappointed with the power of this drill. It's not as powerful as I expected, and it struggles with even light-duty tasks." - Home Depot Customer

My thoughts:

The Black & Decker KX1682 is a good option for homeowners who need a lightweight and easy-to-use cordless drill for light-duty tasks. It's not the most powerful drill on the market, but it's perfect for tasks like hanging pictures, assembling furniture, and drilling small holes. If you're looking for a powerful drill for heavy-duty tasks, you'll need to look elsewhere. However, if you're looking for a reliable and easy-to-use drill for light-duty tasks, the Black & Decker KX1682 is a great option.

Overall, the Black & Decker KX1682 is a good cordless drill for light-duty tasks. It's lightweight, easy to use, and has a long battery life. However, it's not as powerful as some other cordless drills, so it's not a good option for heavy-duty tasks.

Black & Decker KX1682 Where To Buy

some places where you can buy the Black & Decker KX1682 and spare parts:

• Black & Decker Direct: This is the official website of Black & Decker, so you can be sure that you're getting genuine products. They have a wide selection of spare parts available, and you can usually find them at a good price.
• Walmart: Walmart is a great place to find Black & Decker products, and they often have good deals on spare parts. You can also find the KX1682 at most Walmart stores.
• Amazon: Amazon is another great option for finding Black & Decker products. They have a huge selection of spare parts available, and you can often find them at a lower price than other retailers.
• Best Buy: Best Buy is a good option if you're looking for the KX1682 in-store. They usually have a good selection of Black & Decker products, and you can often find the KX1682 on sale.
• Lowes: Lowes is another good option for finding the KX1682 in-store. They usually have a good selection of Black & Decker products, and you can often find the KX1682 on sale.
• eBay: eBay is a great place to find Black & Decker products, including spare parts. You can often find them at a good price, but be sure to do your research to make sure you're getting a genuine product.

I hope this helps!

Black & Decker KX1682 Problems and Solutions

The Black & Decker KX1682 is a popular cordless drill, but it can experience some common issues. Here are a few of the most common problems and solutions:

• The drill won't turn on. This is usually caused by a dead battery. To fix this, try charging the battery for at least 30 minutes. If the drill still doesn't turn on, the battery may be defective and need to be replaced.
• The drill won't drill. This could be caused by a few different things. First, make sure that the drill is in the correct mode (drilling or driving). If the drill is in the correct mode, try cleaning the chuck to remove any debris that may be preventing the bit from engaging. If the drill still won't drill, the chuck may be damaged and need to be replaced.
• The drill is making a strange noise. This could be a sign of a problem with the motor. If the drill is making a strange noise, stop using it immediately and contact Black & Decker for assistance.

Here are some additional tips for troubleshooting common Black & Decker KX1682 problems:

• Check the battery connections. Make sure that the battery is properly connected to the drill. If the connections are loose, they may not be providing enough power to the drill.
• Clean the air vents. The drill has air vents that help to keep it cool. If these vents are clogged with dust or debris, the drill may overheat and malfunction.
• Update the firmware. Black & Decker periodically releases firmware updates for the KX1682. These updates can improve the performance of the drill and fix any known bugs. To update the firmware, you will need to download the update from the Black & Decker website and follow the instructions.

If you have tried all of the above troubleshooting steps and your Black & Decker KX1682 is still not working properly, you may need to contact Black & Decker customer service for assistance.

Black & Decker KX1682 Manual

Black & Decker KX1682 Heat Gun

Safety Information

• Read all instructions before using this heat gun.
• Keep the heat gun out of reach of children.
• Do not use the heat gun in a wet or damp environment.
• Do not use the heat gun for any purpose other than its intended use.
• Do not use the heat gun if it is damaged.
• Be careful not to touch the hot air nozzle.
• Allow the heat gun to cool completely before storing it.

Before Use

• Make sure the heat gun is unplugged before assembling it.
• Attach the desired nozzle to the heat gun.
• Select the desired heat setting.
• Preheat the heat gun for a few minutes before using it.

Troubleshooting

• If the heat gun is not working, check the power cord to make sure it is plugged in properly.
• If the heat gun is still not working, check the fuse.
• If the fuse is blown, replace it with a new fuse of the same amperage.

Maintenance

• Clean the heat gun regularly with a soft cloth.
• Do not use harsh chemicals or abrasive cleaners to clean the heat gun.
• Inspect the heat gun regularly for signs of wear or damage.
• If the heat gun is damaged, do not use it.

Warranty

This heat gun is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the heat gun becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information, please contact Black & Decker:

• Phone: 1-800-234-3572
• Email: [email protected]
• Website: www.blackanddecker.com

Additional Information

• The heat gun can be used to soften plastics, shrink tubing, remove paint, and loosen adhesives.
• The heat gun should not be used to heat food.
• Always use the heat gun in a well-ventilated area.
• Be careful not to overheat the material you are working on.

Safety Precautions

• Always wear safety glasses when using the heat gun.
• Use the heat gun on a stable surface.
• Do not point the heat gun at people or animals.
• Do not use the heat gun near flammable materials.
• Be careful not to touch the hot air nozzle.
• Allow the heat gun to cool completely before storing it.

Storage

• Store the heat gun in a dry, cool place.
• Do not store the heat gun with the power cord plugged in.
• Keep the heat gun out of reach of children.